Cruise on, roll off

WavePort Floating Boat Lifts

Cruise on, roll off

The clean sculpted lines of WavePort complement any personal watercraft and enhance the appearance of any dock or pier. WavePort not only looks great, it provides smooth operation and excellent protection for your PWC. WavePort is available in two sizes and three mounting styles to accommodate virtually any PWC. The free-standing and standard WavePort has a capacity of 1600 lbs, measures 59” x 144” and is designed to allow side-by-side placement of two ports in a ten foot slip. The Deluxe WavePort has a capacity of 2200 lbs and measures 72” x 144”, providing an extra 6” on each side for greater ease in walking to and from the dock.

Information

  • WavePort is an unsinkable floating platform fabricated from foam-filled polyethylene. Durable, corrosion-resistant materials make the WavePort virtually maintenance free. Standard and deluxe models include two specially designed guide rollers for perfect watercraft alignment. All models are equipped with 12” premium quality, heavy-duty side rollers. Pontoons molded into the outer edges of the underside provide extra buoyancy and stability. Bow stop and tie-down ring comes standard on all three models.


    Underside with stabilizing pontoons
    s
    Bow stop tie-down ring
  • Model Capacity Inside Width Outside Width Length Weight Leveling Legs Lift Bed Height-Up Lift Bed Height-Down Lift Travel Canopy Width Size
    WavePort LowPRF Stand Alone 1600 lbs - 56" 144" 210 lbs - 9" - - -
    WavePort LowPRO Standard 1800 lbs - 59" 144" 230 lbs - 9" - - -
    WavePort LowPRDO Deluxe 2200 lbs - 72" 144" 275 lbs - 9" - -

    Heights are measured to the top cross arm, and longer legs are available.
  • no
    Dock Attachment Kit – Attaches Wave Port DLX to other brand floating docks or floating structures
    no
    Buoyancy Booster – 
    Designed to add extra floatation to the front of the Standard and Deluxe Ports making it easier to load and unload large PWC. Works best when using post attachment kits.
    no
    Wave Dock H-Beam Kit –
    Allows direct attachment of Wave Port to Wave Dock utilizing our H-Beam Connection kit.
    no
    This Port-to-Port Side Attachment Kit (16") –
    H-Beams allow side by side connection between two ports, binding them together for additional torsional support.
    no
    Front Post Attachment Kit –
    Allows direct front attachment of dock post to Wave Port for stand alone system anywhere a dock is not required.
    no
    Side Post Attachment Kit –
    Allows the direct side attachment of dock post to Wave Port. Can be used to anchor rear of port when attached to dock, or as a stand-alone system..
    no
    Fixed Dock Attachment Kit (Z-Brackets) for 2 Inch or 4 Inch Pipes – 
    Secures the Wave Armor Standard and Deluxe ports to a fixed dock or sea wall utilizing galvanized and powder coated steel Z-brackets and U-bolts. Pipes required for installation not included.
  • Hinge or Hoop Mount Kits
    The hinge mount allows a WavePort to be attached directly to a dock/pier with bolts or lag screws. The hoop kit includes brackets for use with 2-1/2” or 5-3/4” metal pilings. This method can be used in combination with a dock or for stand-alone installations.
    no

    Stand Alone Port-To-Port Attachment Kit – Connects a pair or multiple SLX ports together utilizing our innovative poly connecting pin system..
    no

    Stand Alone Side Extension – 
    Increase the overall width of a stand alone port by 22". Can attach on either side. Connect using stand alone port-to-port attachment kit. (DF300046).
    no
    Stand Alone Post Extension Attachment Kit – 
    Mounts directly inside the mounting pockets of the stand alone. Extends the outside edge of the port, increasing the distance between two ports, allowing more room for larger sized PWC's. 2 or 4 inch pipes.
    no
    Stand Alone Port to Floating Dock Attachment Kit –
     Our proprietary SLX floating pin connection system easily locks into a pair of sturdy galvanized and powder-coated steel C-channels that are mounted to most floating docks.
    no
    Stand Alone Insert – 
    This optional insert allows you to change the standard 5-3/4” internal diameter molded hoops to a 2-1/2” internal diameter hole. When inserted you can use smaller pipe for the extra support you need.
    no
    Stand Alone Plug – 
    Optional plug to cover unused mounting holes.

    Title

    Previous
    Next